Consolidation by spark plasma sintering (SPS) of polyetheretherketone

The present study deals with the consolidation of an ultra‐high performance polymer, the poly(ether ether ketone) (PEEK), for structural applications, using the powder metallurgy (PM) way, and more precisely the Spark Plasma Sintering (SPS) processing. The effects of SPS parameters such as temperature, pressure, and dwell time on density and mechanical properties of PEEK were investigated via a Design of Experiments (DoE). A temperature of 250 °C, a pressure of 40 MPa, and a dwell time of 20 min have been identified as the optimal SPS process parameters. In these conditions, a density of 1.31 g / cm³ was reached and homogeneous mechanical properties in the volume determined by means of compression tests were found with a compressive modulus of 2.75 GPa, a yield strength of 134 MPa, and a maximum compressive strain of 43%. These results are better than those of commercial products obtained by injection molding. The pressure appears to be a significant parameter on PEEK properties and plays positive or negative roles according to the responses of DoE studied. To our knowledge, it is one of the first studies based on the application of the PM techniques for PEEK consolidation showing the possibility to process below its melting point. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44911.     

Inefficiencies in electricity pricing in England and Wales

The combination of competition and regulation established in the electricity industry of England and Wales stimulates production efficiency and thus helps the industry to achieve low costs. Nevertheless this system does have some disadvantages as regards the incentives it presents to generators and to suppliers. These deficiencies arise because Use of System Charges both for Distribution and for Transmission are determined in a way that inadequately reflects the structure and level of marginal costs. Furthermore, the way that profiling for consumers taking less than 100 kW will work is likely to inhibit tariff innovation.     

Optical quorum cycles for efficient communication

Many optical networks face heterogeneous communication requests requiring topologies to be efficient and fault tolerant. For efficiency and distributed control, it is common in distributed systems and algorithms to group nodes into intersecting sets referred to as quorum sets. We show efficiency and distributed control can also be accomplished in optical network routing by applying the same established quorum set theory. Cycle-based optical network routing, whether using SONET rings or p-cycles, provides the sufficient reliability in the network. Light-trails forming a cycle allow broadcasts within a cycle to be used for efficient multicasts. Cyclic quorum sets also have all pairs of nodes occurring in one or more quorums, so efficient, arbitrary unicast communication can occur between any two nodes. Efficient broadcasts to all network nodes are possible by a node broadcasting to all quorum cycles to which it belongs (\(O(\sqrt{N})\)). In this paper, we propose applying the distributed efficiency of the quorum sets to routing optical cycles based on light-trails. With this new method of topology construction, unicast and multicast communication requests do not need to be known or even modeled a priori. Additionally, in the presence of network link faults, greater than 99 % average coverage enables the continued operation of nearly all arbitrary unicast and multicast requests in the network. Finally, to further improve the fault coverage, an augmentation to the ECBRA cycle finding algorithm is proposed.     

Dual interband cascade laser based trace-gas sensor for environmental monitoring

The development of an interband cascade laser (ICL) based spectroscopic trace-gas sensor for the simultaneous detection of two atmospheric trace gases is reported. The sensor performance was evaluated using two ICLs capable of targeting formaldehyde (H2CO) and ethane (C2H6). Minimum detection limits of 3.5 ppbV for H2CO and 150 pptV for C2H6 was demonstrated with a 1 s integration time. The sensor was deployed for field measurements of H2CO, and laboratory quantification of both formaldehyde and ethane are reported. A cross comparison of the atmospheric concentration data for H2CO with data collected by a collocated commercial H2CO sensor employing Hantzsch reaction based fluorometric detection was performed.These results show excellent agreement between these two different approaches for trace-gas quantification. In addition, laboratory experiments for dual gas quantification show accurate, fast response with no crosstalk between the two gas channels.     

Effects of sliding velocity and applied load on the tribological mechanism of amorphous poly-ether–ether–ketone (PEEK)

In this work, the effects of sliding velocity and applied load on the tribological characteristics, i.e. friction coefficient and wear rate, of an amorphous poly-ether–ether–ketone (PEEK) coating was examined. Friction tests were performed on a ball-on-disc apparatus. Based on analyses of the worn tracks, a comprehensive attempt is made to approach the tribological mechanism of amorphous PEEK. A hypothesis is proposed that the tribological behaviour of the amorphous PEEK is closely related to its viscoelastic behaviour. The sliding velocity plays significant roles on the tribological characteristics by influencing the interface temperature and strain rate of the PEEK surface layer involved in the friction process. The applied load influences the tribological performance by varying the strain range in the surface layer.     

Biotic and abiotic interactions in aquatic microcosms determine fate and toxicity of Ag nanoparticles: part 2-toxicity and Ag speciation

To study the effects of complex environmental media on silver nanoparticle (AgNP) toxicity, AgNPs were added to microcosms with freshwater sediments and two species of aquatic plants (Potamogeton diversifolius and Egeria densa), followed by toxicity testing with microcosm surface water. Microcosms were designed with four environmental matrices in order to determine the contribution of each environmental compartment to changes in toxicity: water only (W), water + sediment (WS), water + plants (WP), and water + plants + sediment (WPS). Silver treatments included AgNPs with two different coatings, gum arabic (GA-AgNPs) or polyvinylpyrollidone (PVP-AgNPs), as well as AgNO(3). Water samples taken from the microcosms at 24 h postdosing were used in acute toxicity tests with two standard model organisms, early life stage zebrafish (Danio rerio) and Daphnia magna. Speciation of Ag in these samples was analyzed using Ag L3-edge X-ray absorption near edge spectroscopy (XANES). Silver speciation patterns for the nanoparticle treatments varied significantly by coating type. While PVP-AgNPs were quite stable and resisted transformation across all matrices (>92.4% Ag(0)), GA-AgNP speciation patterns suggest significantly higher transformation rates, especially in treatments with plants (<69.2% and <58.8% Ag(0) in WP and WPS, respectively) and moderately increased transformation with sediments (<85.6% Ag(0)). Additionally, the presence of plants in the microcosms (with and without sediments) reduced both the concentration of Ag in the water column and toxicity for all Ag treatments. Reductions in toxicity may have been related to decreased water column concentrations as well as changes in the surface chemistry of the particles induced by organic substances released from the plants.     

Spatial and temporal distribution of singlet oxygen in Lake Superior

A multiyear field study was undertaken on Lake Superior to investigate singlet oxygen ((1)O(2)) photoproduction. Specifically, trends within the lake were examined, along with an assessment of whether correlations existed between chromophoric dissolved organic matter (CDOM) characteristics and (1)O(2) production rates and quantum yields. Quantum yield values were determined and used to estimate noontime surface (1)O(2) steady-state concentrations ([(1)O(2)](ss)). Samples were subdivided into three categories based on their absorbance properties (a300): riverine, river-impacted, or open lake sites. Using calculated surface [(1)O(2)](ss), photochemical half-lives under continuous summer sunlight were calculated for cimetidine, a pharmaceutical whose reaction with (1)O(2) has been established, to be on the order of hours, days, and a week for the riverine, river-impacted, and open lake waters, respectively. Of the CDOM properties investigated, it was found that dissolved organic carbon (DOC) and a300 were the best parameters for predicting production rates of [(1)O(2)](ss). For example, given the correlations found, one could predict [(1)O(2)](ss) within a factor of 4 using a300 alone. Changes in the quantum efficiency of (1)O(2) production upon dilution of river water samples with lake water samples demonstrated that the CDOM found in the open lake is not simply diluted riverine organic matter. The open lake pool was characterized by low absorption coefficient, low fluorescence, and low DOC, but more highly efficient (1)O(2) production and predominates the Lake Superior system spatially. This study establishes that parameters that reflect the quantity of CDOM (e.g., a300 and DOC) correlate with (1)O(2) production rates, while parameters that characterize the absorbance spectrum (e.g., spectral slope coefficient and E2:E3) correlate with (1)O(2) production quantum yields.     

Myeloid-Derived Suppressor Cells Gain Suppressive Function during Neonatal Bacterial Sepsis

Neonates are at an increased risk of an infectious disease. This is consistent with an increased abundance of myeloid-derived suppressor cells (MDSCs) compared with older children and adults. Using a murine model of neonatal bacterial sepsis, we demonstrate that MDSCs modulate their activity during an infection to enhance immune suppressive functions. A gene expression analysis shows that MDSCs increased NOS2, Arg-1 and IL-27p28 expression in vitro and in vivo in response to Escherichia coli O1:K1:H7 and this is regulated at the level of the gene expression. Changes in the effector gene expression are consistent with increased enzymatic activity and cytokine secretion. The neonatal MDSCs express toll-like receptor (TLR) 2, 4 and 5 capable of recognizing pathogen-associated molecular patterns (PAMPS) on E. coli. However, a variable level of effector expression was achieved in response to LPS, peptidoglycan or flagellin. Individual bacterial PAMPs did not stimulate the expression of Arg-l and IL-27p28 equivalently to E. coli. However, the upregulation of NOS2 was achieved in response to LPS, peptidoglycan and flagella. The increased immune suppressive profile translated to an enhanced suppression of CD4+ T cell proliferation. Collectively, these findings increase our understanding of the dynamic nature of MDSC activity and suggest that these cells abundant in early life can acquire activity during an infection that suppresses protective immunity.     

Some Physico-Chemical Aspects of the Fibre-Matrix Interphase in Composite Materials

This paper deals with the influence of interphase formation on the stress transfer capacity of the fibre-matrix interface in single fibre composites and constitutes a brief review of our recent work. This influence is studied through the deviation of the experimental results from a recent theoretical analysis relating the interfacial shear strength to the reversible work of adhesion established between the fibre and the matrix. Two examples of interphases are considered: a transcrystalline layer in carbon fibre-PEEK composites and a pseudo-glassy interphase in carbon fibre-elastomer systems. In the former case, the low transverse mechanical properties of the transcrystalline layer lead to a decrease of the interfacial shear strength, whereas, in the latter case, the glassy behaviour of the interphase explains the improved interfacial stress transfer capacity.